{"title":"C4 Fabrication","description":"","products":[{"product_id":"810200260018","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-FH","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466633816,"sku":"810200260018","price":996.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/06157dcac16de866793b621a3bbc685ec15e74b5_5thGen4RunnerLoProCover_1.jpg?v=1771445008"},{"product_id":"810200260223","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-FH-01NA","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466666584,"sku":"810200260223","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/6078194ccc61acff813613f037427cae62994187_5thGen4RunnerLoProCover_1.jpg?v=1771445015"},{"product_id":"810200260025","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-MH","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466699352,"sku":"810200260025","price":961.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/1328ab735748e9605f6f30a77cac508a0d08ab8c_5th_gen_lo_pro_10_3f434556_2f1a_400c_a3f1_dfaf7c557f46_1.jpg?v=1771445022"},{"product_id":"810200260322","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-MH-01NA","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466732120,"sku":"810200260322","price":1099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/6bac29c41bcac2c3049cbb7896b7cafb6f376ed1_5th_gen_lo_pro_10_3f434556_2f1a_400c_a3f1_dfaf7c557f46_1.jpg?v=1771445028"},{"product_id":"810200260001","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-NB","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466764888,"sku":"810200260001","price":882.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/8c7f7ca51b2df0b4760cc79e3d2c27e63cbec402_PhotoNov14_10711PM_2_1.jpg?v=1771445035"},{"product_id":"810200260339","title":"C4 Fabrication - 4Runner Lo-Pro Winch Bumper \/ 5th Gen \/ 2014-2024 - 1100-1114-30-NB-01NA","description":"Bumper is compatible with TSS on 2020+ models \u0026amp; MTM on 2022+ models\n\nFull Height Bar is compatible with TSS\n\nMid Height Bar is NOT compatible with TSS\n\nNOT Compatible with 2014+ Limited or 2022+ Sports trims\n\nCompatible with TRD Pro skid plate\n\nCutting of the center plastic portion of the factory bumper cover is required to install the bumper\n\nFeatures:\n\nLighting \u0026amp; Winch Options\n\nLo Profile Fitment\n\nClevis Mounts for D-Rings\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nIncludes all Necessary Mounting Brackets \u0026amp; Hardware for Install\n\nBumper Weighs 75lbs\n\nAdd-Ons:\n\nDesigned Specifically for the Baja Designs S8 30” Light Bar\n\nAlso compatible with the RIGID 30” SR Series and Extreme LED 30” 5D Light Bar\n\nFits Most Winches 8k-12k in Size. Winches with the ability to relocate control box recommended. Confirmed fitment on ComeUp, Smittybilt X20, Warn Zeon and VR series winches.\n\nWe Recommend Synthetic Rope Winches \u0026amp; Hawse Style Fairleads for Best Functionality","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466797656,"sku":"810200260339","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/0555ec5f3e2f16103c4548e8801c6292d3b0bd38_PhotoNov14_10711PM_2_1.jpg?v=1771445041"},{"product_id":"810200260193","title":"C4 Fabrication - 4Runner Lo Pro Bumper High Clearance Additions \/ 5th Gen \/ 2014-2024 - 1100-1214-HCSA","description":"C4 4Runner Lo Pro Bumper Required for Installation. Sold Separately.\n\nNo Drilling Required\n\nCutting the Plastic Bumper is Required\n\nFeatures:\n\nGain more clearance at the front of your 4Runner to give more room for larger tires and create a better approach angle to large obstacles.\n\nMade from 11ga Steel\n\nHardware is included\n\nWeighs 35 lbs \n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Washer Tank Skid Available","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466830424,"sku":"810200260193","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/df728231ce08c97640013208897e3d02ed819f96_5thGen4RunnerLoProHighClearanceExtensionsCover_1.jpg?v=1771445047"},{"product_id":"810200260452","title":"C4 Fabrication - 4Runner Lo Pro Bumper High Clearance Additions \/ 5th Gen \/ 2014-2024 - 1100-1214-HCSA-01NA","description":"C4 4Runner Lo Pro Bumper Required for Installation. Sold Separately.\n\nNo Drilling Required\n\nCutting the Plastic Bumper is Required\n\nFeatures:\n\nGain more clearance at the front of your 4Runner to give more room for larger tires and create a better approach angle to large obstacles.\n\nMade from 11ga Steel\n\nHardware is included\n\nWeighs 35 lbs \n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Washer Tank Skid Available","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334466895960,"sku":"810200260452","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/e414223a482eceed7f739f665f1e2bdaad9e8434_5thGen4RunnerLoProHighClearanceExtensionsCover_1.jpg?v=1771445054"},{"product_id":"810200262265","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-FH","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334468894808,"sku":"810200262265","price":1957.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/ead4236d96346d58a8810bf7eda76e56c008775a_5thGen4RunnerOverlandFrontCover_1.jpg?v=1771445091"},{"product_id":"810200262272","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-FH-01NA","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334468927576,"sku":"810200262272","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/6e534181b368663f07c8124cba262d2151057b48_5thGen4RunnerOverlandFrontCover_1.jpg?v=1771445098"},{"product_id":"810200262289","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-FHH","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334468960344,"sku":"810200262289","price":2006.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/4a205b4155310da1c7b3c77fb86f5eb3072ac59b_4RunnerOverlandSeriesFrontBumper5thGen2014__7_1.jpg?v=1771445105"},{"product_id":"810200262296","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-FHH-01NA","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334468993112,"sku":"810200262296","price":2299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/498f2ebe41342b77075c87f8e450f07415cda3f7_4RunnerOverlandSeriesFrontBumper5thGen2014__7_1.jpg?v=1771445111"},{"product_id":"810200262302","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-MH","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334469025880,"sku":"810200262302","price":1877.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/2d170d90f64ff098d1bb93c996cf0b032e056540_4RunnerOverlandSeriesFrontBumper5thGen2014__13_1.jpg?v=1771445118"},{"product_id":"810200262319","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-MH-01NA","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334469058648,"sku":"810200262319","price":2199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/f26fc3b9ebca2450f0b7b0d3cfd9d4f5a3964183_4RunnerOverlandSeriesFrontBumper5thGen2014__13_1.jpg?v=1771445124"},{"product_id":"810200262326","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-NB","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334469091416,"sku":"810200262326","price":1798.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/24ce38434e3665a7c91ef0925ab6026c142192e1_4RunnerOverlandSeriesFrontBumper5thGen2014__13_1.jpg?v=1771445130"},{"product_id":"810200262333","title":"C4 Fabrication - 4Runner Overland Series Front Bumper \/ 5th Gen \/ 2014-2024 - 1100-3114-30-NB-01NA","description":"Bumper offers more clearance for better approach angles and makes it easier to fit larger tires.\nBumper is made from 3\/16″ laser cut P\u0026amp;O steel with 1\/4″ thick mounting plates.\n3\/4″ thick D-Ring tabs standard on every bumper and come fully welded front and back.\nBull bar tubing is .120 wall 1 3\/4″ diameter HREW tubing.\nIf you have TSS you must select YES for the TSS relocation bracket (NOT compatible with mid-height bull bar)\nFits most winches 8k-12k in size. Winches with the ability to relocate the electrical control box are recommended. Integrated control box winches may require some trimming of the grille support brackets to fit. (ComeUp, Smittybilt X20, Warn Zeon and VR series are all common winches that fit).\nWe recommend using winches with synthetic rope and a hawse style fairlead for the best fitment and functionality. Some roller fairleads may be too large to fit the recessed fairlead mounting plate in the bumper.\nIs not compatible with MTM front camera without relocating camera above bumper\n135lbs without bull bar, 140lbs with mid height bull bar, 150lbs with full height bull bar, 155lbs with full height bull bar and headlight hoops.\nBumper is designed to fit 30″ single row light bars (specifically designed for Baja Designs S8 light bar). Extreme LED 30″ 5D light bar and RIGID 30″ SR series, will also fit.\nThis bumper requires cutting the original plastic bumper cover to install.\nInstalling this bumper also requires removing the original steel power steering cooler lines and replacing them with the power steering cooler kit we provide with the bumper. Installation of the cooler kit is straight forward and does not require draining the power steering system. Replacing the power steering lines provides more room for the winch and also removes the low hanging “U shaped” portion of the lines near where the bumper bolts to the frame so that the lines are not exposed to obstacles and debris.\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334469124184,"sku":"810200262333","price":2099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/def7d3a74bd01fde2c9fb3a9abbd70070a1ece73_4RunnerOverlandSeriesFrontBumper5thGen2014__13_1.jpg?v=1771445137"},{"product_id":"810200261350","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-DUAL","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470074456,"sku":"810200261350","price":3988.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/5443f395220d487ea6f5569719b748091a3c0e57_5thGen4RunnerOverlandRearCovera_1.jpg?v=1771445170"},{"product_id":"810200261343","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-DUAL-01NA","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470107224,"sku":"810200261343","price":4499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/94d803800befb6bd8a77e716b3fa9b652d0f074a_5thGen4RunnerOverlandRearCovera_2.jpg?v=1771445177"},{"product_id":"810200262241","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-HALF","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470139992,"sku":"810200262241","price":3323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/9c57e53cadee75d1889400044270091a6e24f8ed_5thGen4RunnerOverlandRearCovera_1.jpg?v=1771445184"},{"product_id":"810200262258","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-HALF-01NA","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470172760,"sku":"810200262258","price":3759.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/a2ed99f562e4cb0185dc04de7a3c2fe638b2e666_5thGen4RunnerOverlandRearCovera_1.jpg?v=1771445190"},{"product_id":"810200261329","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-NS","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470205528,"sku":"810200261329","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/ae21ac2c330a47ef321dd4e9de1fe0c4b6e876cf_5thGen4RunnerOverlandRearCovera_1.jpg?v=1771445196"},{"product_id":"810200261336","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-NS-01NA","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470271064,"sku":"810200261336","price":2799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/97c4a8afcced9b9af4187886746c565628a6182c_5thGen4RunnerOverlandRearCovera_2.jpg?v=1771445202"},{"product_id":"810200261374","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-SINGLE-P","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470303832,"sku":"810200261374","price":3498.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/995256d15b0be33ad4334da43ec45896a7b9ac95_5thGen4RunnerOverlandRearCovera_1.jpg?v=1771445209"},{"product_id":"810200261367","title":"C4 Fabrication - 4Runner Overland Series Rear Bumper \/ 5th Gen \/ 2010-2024 - 1100-4110-SINGLE-P-01NA","description":"Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment\n\nCompatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).\n\nNOT Compatible with 2021+ BSM\n\nNOT Compatible with Parking Sensors on some Models\n\nFeatures:\n\nWhen the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.\n\nMultiple Accessory Mounting Configurations available via Mounting Hole Patterns\n\nDesigned with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open\n\nAnti-Rattle, Heavy Duty Swing-Out Latching System\n\nSwing-Out fits up to a 35″ Tire.\n\nIncludes a license plate mount kit with light.\n\nRetains camera functionality.\n\nSingle (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.\n\nMaxtrax brand mounting pins recommended \/ RotoPax brand mount not included \u0026amp; required to use with our mount.\n\nOur Rotopax\/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.\n\nAll of our mounts can be adjusted vertically on our swing arms according to preference.\n\nOn Half Swing Bumper: Tire mount must be removed to bolt on other accessories.\n\nBase bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.\n\nPlease Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.\n\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\n\nAdd-Ons:\n\nOptional Rotopax Mount\n\nOptional Hi-Lift Jack Mount\n\nOptional Jerry Can Holder\n\nOptional Reverse Camera Mount\n\nOptional Ham Antenna Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470336600,"sku":"810200261367","price":3999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/0ab36038b2ff1ce325f7e91a270db76587940b1d_5thGen4RunnerOverlandRearCovera_2.jpg?v=1771445216"},{"product_id":"810200261787","title":"C4 Fabrication - Lexus GX460 \u0026 Toyota 4Runner Differential Skid \/ 2010-2023, 2010-2024 - 1100-5110-K","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470402136,"sku":"810200261787","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/5bb3ebe5eec627cbb2796d23d5871e4abce27e86_c4_diff_skid_fargo_5_1500_e1533080143108_574c7976_8c76_48e7_bb36_107e257fb39b_1.jpg?v=1771445222"},{"product_id":"810200261794","title":"C4 Fabrication - Lexus GX460 \u0026 Toyota 4Runner Differential Skid \/ 2010-2023, 2010-2024 - 1100-5110-K-01NA","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470500440,"sku":"810200261794","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/2c241e21232ed4eb7d9301310e865970372c0d6d_c4_diff_skid_fargo_5_1500_e1533080143108_574c7976_8c76_48e7_bb36_107e257fb39b_1.jpg?v=1771445228"},{"product_id":"810200261800","title":"C4 Fabrication - 4Runner Differential Skid \/ 4th Gen \/ 2003-2009 - 1100-5110-K-E","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470533208,"sku":"810200261800","price":347.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/b5308d9b093eb737ac73536bde085e920534612a_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445235"},{"product_id":"810200261817","title":"C4 Fabrication - 4Runner Differential Skid \/ 4th Gen \/ 2003-2009 - 1100-5110-K-E-01NA","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470565976,"sku":"810200261817","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/aac59a54e309901b30a65ad50441e957127b9f6c_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445243"},{"product_id":"810200261824","title":"C4 Fabrication - 2003-2024 4Runner \u0026 2003-2009 GX470 Differential Skid - 1100-5110-NK","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470598744,"sku":"810200261824","price":332.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/9c0ba5af4a28693c44634ce775ce3fac6816fa0f_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445250"},{"product_id":"810200261831","title":"C4 Fabrication - 2003-2024 4Runner \u0026 2003-2009 GX470 Differential Skid - 1100-5110-NK-01NA","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470631512,"sku":"810200261831","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/c7b31fc9df47d70a0eb07557f1a2542166a9f374_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445257"},{"product_id":"810200261848","title":"C4 Fabrication - 4Runner Differential Skid \/ 5th Gen \/ 2010+ - 1100-5110-NK-E","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470664280,"sku":"810200261848","price":347.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/90446c485897808ac71571661f1b5019de3b5eed_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445265"},{"product_id":"810200261855","title":"C4 Fabrication - 4Runner Differential Skid \/ 5th Gen \/ 2010+ - 1100-5110-NK-E-01NA","description":"Fits KDSS or Non-KDSS 4runners 2010-current years.\nWorks with E-locker equipped differentials.\nDiff skid extends forward far enough to offer U-Joint and driveshaft yoke protection.\nOptional E-locker guard can be added for extra protection of E-locker motor.\nMade from 3\/16″ thick mild steel.\n100% bolt on, no drilling or cutting required.\nAll mounting hardware included\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470697048,"sku":"810200261855","price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/7f8e303d43941b775f0adaae73d397453449a5f3_4runnerdifferentialskidplate2010_2aacd979_d501_4def_8855_a5c668cbd015_1.png?v=1771445272"},{"product_id":"810200260643","title":"C4 Fabrication - Lexus GX460 \u0026 Toyota 4Runner Fuel Tank Skid Plate \/ 2010-2024 - 1100-5210","description":"100% bolt on design\nMade from 3\/16″ P\u0026amp;O steel plate\nAll mounting hardware included\nEasy installation\nArchways cut into sides of skid plate to allow drainage\nSolid plate bottom for strength and protection\n62 lbs\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470729816,"sku":"810200260643","price":474.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/3ec509824ed0c0efdef43dfbeba8accedc11fa0f_4thGen4RunnerFuelTankSkidCover_1.jpg?v=1771445279"},{"product_id":"810200260650","title":"C4 Fabrication - Lexus GX460 \u0026 Toyota 4Runner Fuel Tank Skid Plate \/ 2010-2024 - 1100-5210-01NA","description":"100% bolt on design\nMade from 3\/16″ P\u0026amp;O steel plate\nAll mounting hardware included\nEasy installation\nArchways cut into sides of skid plate to allow drainage\nSolid plate bottom for strength and protection\n62 lbs\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470828120,"sku":"810200260650","price":559.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/2e30288e3342faa4d63c28cecc7a7507133ee673_4thGen4RunnerFuelTankSkidCover_1.jpg?v=1771445285"},{"product_id":"810200260063","title":"C4 Fabrication - 4Runner Windshield Washer Tank Skid \/ 5th Gen \/ 2010+ - 1100-5300","description":"Protects windshield washer reservoir from road and trail debris when exposed with aftermarket bumpers\nWorks with C4 Hybrid, Overland, and Lo-Pro with High Clearance Additions\nMade from 14ga P\u0026amp;O steel\n100% Bolt-On\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470860888,"sku":"810200260063","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/c943342972c71eec31cc379d3c98971f182d1a39_5thGen4RunnerWasherTankSkidCover_1.jpg?v=1771445292"},{"product_id":"810200260445","title":"C4 Fabrication - 4Runner Windshield Washer Tank Skid \/ 5th Gen \/ 2010+ - 1100-5300-01NA","description":"Protects windshield washer reservoir from road and trail debris when exposed with aftermarket bumpers\nWorks with C4 Hybrid, Overland, and Lo-Pro with High Clearance Additions\nMade from 14ga P\u0026amp;O steel\n100% Bolt-On\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470893656,"sku":"810200260445","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/fc0adcfa9bfea2ed52361b8d55edde2096891db2_5thGen4RunnerWasherTankSkidCover_1.jpg?v=1771445298"},{"product_id":"810200261886","title":"C4 Fabrication - GX460 \u0026 4Runner Front Skid Plate \/ 5th Gen \/ 2010+ - 1100-5403-K","description":"Available for KDSS and Non-KDSS 4Runners\nWide coverage to help protect vital engine components\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with 1\" diff drop\nWorks with most aftermarket bumpers\nWeighs 62lb\nAll mounting hardware included\nIncludes front skid plate only\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470926424,"sku":"810200261886","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/896c05bb07326386e38b175ce117bc4639c74e44_GX470FrontSkidPlateCover_1.jpg?v=1771445304"},{"product_id":"810200261893","title":"C4 Fabrication - GX460 \u0026 4Runner Front Skid Plate \/ 5th Gen \/ 2010+ - 1100-5403-K-01NA","description":"Available for KDSS and Non-KDSS 4Runners\nWide coverage to help protect vital engine components\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with 1\" diff drop\nWorks with most aftermarket bumpers\nWeighs 62lb\nAll mounting hardware included\nIncludes front skid plate only\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334470959192,"sku":"810200261893","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/ab6fee9bd32cc798ec8b53496991cf94c8924456_GX470FrontSkidPlateCover_1.jpg?v=1771445311"},{"product_id":"810200261909","title":"C4 Fabrication - 4Runner Front Skid Plate \/ 5th Gen \/ 2010+ - 1100-5403-NK","description":"Available for KDSS and Non-KDSS 4Runners\nWide coverage to help protect vital engine components\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with 1\" diff drop\nWorks with most aftermarket bumpers\nWeighs 62lb\nAll mounting hardware included\nIncludes front skid plate only\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471090264,"sku":"810200261909","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/140f882cfb25e632a4315e07f6ca955a9e3d4891_5thGen4RunnerFrontSkidPlateCover_1.jpg?v=1771445320"},{"product_id":"810200261916","title":"C4 Fabrication - 4Runner Front Skid Plate \/ 5th Gen \/ 2010+ - 1100-5403-NK-01NA","description":"Available for KDSS and Non-KDSS 4Runners\nWide coverage to help protect vital engine components\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nOil Drain and Oil Filter Covers allow for easy oil changes without removing the skid plates\nWorks with 1\" diff drop\nWorks with most aftermarket bumpers\nWeighs 62lb\nAll mounting hardware included\nIncludes front skid plate only\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471123032,"sku":"810200261916","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/9cd066367f35adc516c8e5869ce8d90c2bee5a07_5thGen4RunnerFrontSkidPlateCover_1.jpg?v=1771445326"},{"product_id":"810200261923","title":"C4 Fabrication - 4Runner Rear Skid Plates \/ 5th Gen \/ 2010+ - 1100-5403-R","description":"Protects transmission, transfer case and exhaust (including catalytic converters)\nIncludes a unique bolt-in crossmember for maximum strength and protection for the transfer case\nDoes not work without C4 front skid plate\nWorks with all C4 front skid plates (KDSS, Non-KDSS, and TRD Pro Integration)\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nWeighs 74lb\nAll mounting hardware included\nIncludes transmission and transfer case skid plates only\nDOES NOT include front skid plate\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471286872,"sku":"810200261923","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/8a009965240267bb044ede523e5512aac4e82d28_5thGen4RunnerRearSkidPlateCover_1.jpg?v=1771445336"},{"product_id":"810200261930","title":"C4 Fabrication - 4Runner Rear Skid Plates \/ 5th Gen \/ 2010+ - 1100-5403-R-01NA","description":"Protects transmission, transfer case and exhaust (including catalytic converters)\nIncludes a unique bolt-in crossmember for maximum strength and protection for the transfer case\nDoes not work without C4 front skid plate\nWorks with all C4 front skid plates (KDSS, Non-KDSS, and TRD Pro Integration)\nMade from 3\/16\" CNC cut P\u0026amp;O steel\n100% Bolt-On design\nWeighs 74lb\nAll mounting hardware included\nIncludes transmission and transfer case skid plates only\nDOES NOT include front skid plate\nAvailable in steel only\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471319640,"sku":"810200261930","price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/65baf0ce62938c65d4904f161fe54ee1bd60af3d_5thGen4RunnerRearSkidPlateCover_1.jpg?v=1771445343"},{"product_id":"810200260186","title":"C4 Fabrication - 4Runner Summit Hatch Ladder \/ 5th Gen \/ 2010-2024 - 1100-6110","description":"Fitment:\n\nCompatible with these roof racks: Sherpa Equipment Co., Frontrunner Slimline, Prinsu Design, SSO, TMT, Echotechne, Toyota TRD Pro, ARB\n\nRequires drilling for lower ladder mount\n\nFeatures:\n\nMain ladder steps made from extruded aluminum T-Slot\n\nAccessory Mounting Points Provided by Slotted Holes on Sides of Ladder\n\nRubber Tread Strips are Included\n\nLightweight Aluminum Construction\n\nHD Steel Mounting Brackets\n\nStainless Steel Hardware\n\nBlack Powder Coat Finish\n\n250lb Static Load Rating\n\n20lb Dynamic Load Rating\n\nAdd-Ons:\n\nOptional Steel Side Steps for Extra Footing\n\nOptional Steel Rotopax Bracket","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471417944,"sku":"810200260186","price":549.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/4e27dc14e808b7fe132b4e7a39d08ad907a7e38b_5thGen4RunnerSummitHatchLadderCover_1.jpg?v=1771445352"},{"product_id":"810200260056","title":"C4 Fabrication - Summit Hatch Ladder Lower Mounting Bracket Kit - 1100-6110-BRACKET-KIT","description":"Kit includes the newly designed lower ladder bracket, cage nut strip, all necessary hardware to replace the bracket, and antiseize.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471450712,"sku":"810200260056","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/3c29ecffdfaaa3918b52f85cde927e605deabf72_1H3A04972_1.jpg?v=1771445355"},{"product_id":"810200260087","title":"C4 Fabrication - Summit Hatch Ladder Rotopax Mount Bracket \/ 5th Gen \/ 2010+ - 1100-6210-RP","description":"Use this bracket to attach a Rotopax brand mount to your Summit Ladder.\nBracket comes powder coated black and contains hardware to attach bracket to the ladder.\nRotopax brand mount is needed to attach Rotopax container to this bracket.\nUp to 2 gallon size Rotopax can be attached.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471549016,"sku":"810200260087","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/895dfaa6e80b8deb7750fbbf91a4264f3b1a9dea_5thGen4RunnerSummitRotopaXMountCover_1.jpg?v=1771445362"},{"product_id":"810200260094","title":"C4 Fabrication - Summit Hatch Ladder Side Step \/ 5th Gen \/ 2010+ - 1100-6310-SS","description":"Additional side step to bolt on to your Summit Hatch Ladder.\nEach step comes with hardware to attach the step to the ladder.\nSide steps are powder coated black.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471581784,"sku":"810200260094","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/5847e7be25b8e326020c3835fbc01ed1310516ef_5thGen4RunnerSummitStepCover_1.jpg?v=1771445368"},{"product_id":"810200260261","title":"C4 Fabrication - 4Runner TSS Relocation Kit - 1100-8020","description":"Compatible with 2020-current 4Runners with TSS.\nConfirmed compatibility with standard grille and TRD Pro Grille. Compatibility with Limited grille has not yet been confirmed.\nRelocates the TSS (Toyota Safety Sense) sensor up behind your grille to allow for use with aftermarket bumpers.\n\nCompatible with C4 Hybrid and Overland Series bumpers (EXCEPT for bumpers with mid-height bull bar).\nBracket allows for fine tuning to ensure proper sensor adjustment.\n100% bolt-on\nIncludes necessary mounting hardware\nMade from 12ga steel\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471614552,"sku":"810200260261","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/5a34ed2e5baf0ddb25d88edb6c753b6073b3377a_5thGen4RunnerTSSRelocationCover_1.jpg?v=1771445374"},{"product_id":"810200260384","title":"C4 Fabrication - 4Runner TSS Relocation Kit - 1100-8020-01NA","description":"Compatible with 2020-current 4Runners with TSS.\nConfirmed compatibility with standard grille and TRD Pro Grille. Compatibility with Limited grille has not yet been confirmed.\nRelocates the TSS (Toyota Safety Sense) sensor up behind your grille to allow for use with aftermarket bumpers.\n\nCompatible with C4 Hybrid and Overland Series bumpers (EXCEPT for bumpers with mid-height bull bar).\nBracket allows for fine tuning to ensure proper sensor adjustment.\n100% bolt-on\nIncludes necessary mounting hardware\nMade from 12ga steel\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471680088,"sku":"810200260384","price":204.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/7c4e228de67dd6601ebdbf183a94a1a83d3c6f0a_5thGen4RunnerTSSRelocationCover_1.jpg?v=1771445380"},{"product_id":"810200260681","title":"C4 Fabrication - FJ Cruiser \u0026 4Runner Spare Battery Tray - Passenger Side \/ 5th Gen \/ 2010-2024 - 1100-8110","description":"Weight: 7lbs\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\nMax Battery Size – Length: 11″ Width: 7″ Height: 9″","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471712856,"sku":"810200260681","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/7f30aa6b655fb7f486edc63aca1030e88e0d5a54_FJ40SpareBatteryTrayCover_1.jpg?v=1771445386"},{"product_id":"810200260698","title":"C4 Fabrication - FJ Cruiser \u0026 4Runner Spare Battery Tray - Passenger Side \/ 5th Gen \/ 2010-2024 - 1100-8110-01NA","description":"Weight: 7lbs\nUnless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust\nMax Battery Size – Length: 11″ Width: 7″ Height: 9″","brand":"C4 Fabrication","offers":[{"title":"Default Title","offer_id":43334471811160,"sku":"810200260698","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0642\/4582\/5624\/files\/750b4c83fb18f672353c968aae8fab0fd7fe3363_FJ40SpareBatteryTrayCover_1.jpg?v=1771445392"}],"url":"https:\/\/cascaderack.com\/collections\/c4-fabrication.oembed","provider":"Cascade Rack","version":"1.0","type":"link"}